Taking our Sealing Edge Technology to a new level, our Omega Seal and Clamp will revolutionize your load zone!
OMEGA SEAL AND CLAMP
PATENT NUMBER 9938087
The first and only of its kind:
When choosing the clamp size always make sure you choose the size that best fits the chute width. If your chute is in between the standard sizes always default to the next lower size. Then choose the troughing degree. This choice is not based on the troughing rollers on the conveyor. It is based on the transition into the chute. Most load zones have 35 degree toughing rollers but depending on the transition of the belt from the tail pulley into the chute it may be best to use a 20 degree.
If you are unsure please download our worksheet and if completed we can choose the best size for your chute.
OMEGA SEAL
| PART NUMBER | LENGTH | DESCRIPTION |
|---|---|---|
| OS548 | 48" | Omega Seal |
| OS572 | 72" | Omega Seal |
EPDM-HIGH HEAT APPLICATION
| PART NUMBER | LENGTH | DESCRIPTION |
|---|---|---|
| OSE548 | 48" | Omega Seal |
| OSE572 | 72" | Omega Seal |
20 Degree
| PART NUMBER | CHUTE WIDTH | WEIGHT |
|---|---|---|
| OSC2014 | 14" | 20 |
| OSC2016 | 16" | 22 |
| OSC2018 | 18" | 23 |
| OSC2020 | 20" | 24 |
| OSC2022 | 22" | 26 |
| OSC2024 | 24" | 28 |
| OSC2026 | 26" | 30 |
| OSC2028 | 28" | 32 |
| OSC2030 | 30" | 35 |
| OSC2032 | 32" | 37 |
| OSC2034 | 34" | 40 |
| OSC2036 | 36" | 44 |
| OSC2038 | 38" | 48 |
| OSC2040 | 40" | 55 |
35 Degree
| PART NUMBER | CHUTE WIDTH | WEIGHT |
|---|---|---|
| OSC3514 | 14" | 20 |
| OSC3516 | 16" | 22 |
| OSC3518 | 18" | 23 |
| OSC3520 | 20" | 24 |
| OSC3522 | 22" | 26 |
| OSC3524 | 24" | 28 |
| OSC3526 | 26" | 30 |
| OSC3528 | 28" | 32 |
| OSC3530 | 30" | 35 |
| OSC3532 | 32" | 37 |
| OSC3534 | 34" | 40 |
| OSC3536 | 36" | 44 |
| OSC3538 | 38" | 48 |
| OSC3540 | 40" | 55 |
OTHER CHUTE WIDTHS AVAILABLE UPON REQUEST. Note: In many cases the chutes are wider than what CEMA recommends for belt width. Please do not base your choice on belt width. Chute Width is what matters.
